Part Number Hot Search : 
BT4855 MAX488 SMCJ22 29LV320 2N5653 MAX4800 A2188 25CTA3T
Product Description
Full Text Search
 

To Download 3HPA8-B-250000 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 EURO QUARTZ
DESCRIPTION HPA8 series LVPECL output oscillators cover the frequency range 60MHz to 320MHz. The part utilizes a crystal operating in third overtone mode (Non-PLL) SPECIFICATION Frequency Range: Output Logic Phase Noise: Frequency Stability: Operating Temp Range Commercial: Industrial: Input Voltage: Output Voltage High '1': Low '0': Rise/Fall Times: Current Consumption: Load: Start-up Time: Duty Cycle: Input Static Discharge Prot: Storage Temperature Range: Ageing: Enable/Disable No connection: Disable:
HPA8 LVPECL OSCILLATORS
8 pin Dual-in-Line
60.0MHz to 320.0MHz LVPECL See table See table -10 to +70C -40 to +85C +2.5VDC or +3.3VDC 5% Vdd -1.025V min. Vdd -1.620V max. (RL = 50W to Vdd -2.0V) 0.25ns typical (20% Vdd to 80% Vdd) 75mA max. at 212.50MHz 50W into Vdd-2.0V 5ms typ., 10ms max. 50%5% (at Vdd -1.3V) 2kV min. -55C to +150C 3ppm per year max., 2ppm thereafter. At T amb +25C
OUTLINE & DIMENSIONS
Both outputs enabled Both outputs are disabled when control pad is taken below 0.3V referenced to ground. Oscillator is always 'on'. (Special request oscillator is off when disabled.) Enable: Both Outputs are enabled when control pad is taken above 0.7 Vcc referenced to ground. ABSOLUTE MAXIMUM RATINGS (Permanent damage may be caused if operated beyond these limits.) Supply Voltage Vdd: +4.6V max. Input Voltage Vi: Vss -0.5 min., VDD +0.5V max. Input Voltage Vo: Vss -0.5 min., Vdd +0.5V max.
PHASE NOISE (155.250MHz) Offset 10Hz 100Hz 1kHz 10kHz 100kHz 1MHz 10MHz dBc/Hz -65 -95 -120 -128 -122 -120 -140
STABILITY OVER TEMPERATURE RANGE Stability ppm 25 50 100 25 50 100 Temperature Range Order Code C -10 to +70 -10 to +70 -10 to +70 -40 to +85 -40 to +85 -40 to +85 A B C D E F
PART NUMBERS HPA8 oscillator part numbers are derived as follows: Example: Supply Voltage 3 = 3.3VDC 25 = 2.5VDC Series Designation Package Style Stability Code (See table) Frequency
3HPA8-A-250.000
JITTER Integrated Phase Jitter: 0.25ps typical at 155.520MHz (12kHz to 20MHz) Period Jitter (RMS): 3.0ps typical at 155.520MHz Period Jitter (peak to peak): 21ps typical at 155.520MHz
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: info@euroquartz.co.uk www.euroquartz.co.uk


▲Up To Search▲   

 
Price & Availability of 3HPA8-B-250000

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X